Rules and recommendations
|
|
In order to read the following documents you can use
|
 |
List of current set of rules
The whole process, from construction, production and operation of the wind turbines, is
included in the certification scheme, which applies to all wind turbines with a rotor diameter
greater than 2 meters:
|
The Danish Energy Agency's Executive order on the technical certification scheme
for the design, manufacture, installation, maintenance and service of wind turbines,
June 28 2008 nr. 651
|
English
version
 |
The Danish Energy Agency’s guidelines for the
technical certification scheme for the design, manufacture and
installation of wind turbines in Denmark
|
English version
|
The Danish Energy Agency’s
rules for small wind turbines 1th May 2009
|
English version
|
IEC System for Conformity Testing and Certification
of Wind Turbines IEC WT01, 1st edition
|
To be purchased at
IECommission |
Regulation TF 3.2.5 Wind
turbines connected to grids with voltages over 100 kV" by the
el-system responsible company
Energinet.dk
|
Get Document
|
Regulation TF 3.2.6 Wind
turbines connected to grids with voltages below 100 kV" by the
el-system responsible company
Energinet.dk
|
Get
document
|
Recommendations
In connection with the above
mentioned Technical Criteria recommendations have been worked out
with instructions as to how a number of the prescribed requirements can
be fulfilled within specific fields:
|
|
|
Rekommandation for Generatorkoncepter til vindmøller
Bilag til Teknisk Grundlag for typegodkendelse og certificering af
vindmøller i Danmark, marts 2000 (in danish)
|
Get
document
|
Wind Turbine Performance Testing Supplementary requirements for the
application of IEC 61400-12 under the Danish Approval Scheme for Wind
Turbines, 7. marts 2000, Energistyrelsens supplerende krav ved
anvendelse af IEC 61400-12
|
Get
document
|
Recommendation for technical approval of offshore
wind
turbines, december 2001
|
Get document
|
Requirements to Cup Anemometers Applied for Power Curve Measurements
under the Danish Approval Scheme for Wind Turbines, january 2002.
|
Get
document
|
Recommendation to Comply with the Requirements in the
Technical Criteria for the Danish Approval Scheme for Wind Turbines.
Gearboxes, august 2005
|
Get
document
|
Recommendation for Design Documentation and Test of Wind Turbine Blades,
november 2002
|
Get
document
|
